OnOffControllerOn-off controller |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The block OnOffController sets the output signal y to true when the input signal u falls below the reference signal minus half of the bandwidth and sets the output signal y to false when the input signal u exceeds the reference signal plus half of the bandwidth.
Parameters (2)
| bandwidth |
Value: Type: Real Description: Bandwidth around reference signal |
|---|---|
| pre_y_start |
Value: false Type: Boolean Description: Value of pre(y) at initial time |
Connectors (3)
 |
reference |
Type: RealInput Description: Connector of Real input signal used as reference signal |
|---|---|---|
|
u |
Type: RealInput Description: Connector of Real input signal used as measurement signal |
 |
y |
Type: BooleanOutput Description: Connector of Real output signal used as actuator signal |
Used in Examples (2)
 |
Modelica.Fluid.Examples Model of a pumping system for drinking water |
 |
Modelica.Thermal.HeatTransfer.Examples Control temperature of a resistor |