Multiplex2Multiplexer block for two input connectors |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The output connector is the concatenation of the two input connectors. Note, that the dimensions of the input connector signals have to be explicitly defined via parameters n1 and n2.
Parameters (2)
| n1 |
Value: 1 Type: Integer Description: Dimension of input signal connector 1 |
|---|---|
| n2 |
Value: 1 Type: Integer Description: Dimension of input signal connector 2 |
Connectors (3)
 |
u1 |
Type: RealInput[n1] Description: Connector of Real input signals 1 |
|---|---|---|
|
u2 |
Type: RealInput[n2] Description: Connector of Real input signals 2 |
 |
y |
Type: RealOutput[n1 + n2] Description: Connector of Real output signals |
Used in Components (1)
 |
Modelica.Mechanics.Rotational.Components Signal adaptor for a Rotational flange with torque as output and angle, speed, and optionally acceleration as inputs (especially useful for FMUs) |