SawToothGenerate saw tooth signal |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The Real output y is a saw tooth signal:
Parameters (5)
| offset |
Value: 0 Type: Real Description: Offset of output signal y |
|---|---|
| startTime |
Value: 0 Type: Time (s) Description: Output y = offset for time < startTime |
| amplitude |
Value: 1 Type: Real Description: Amplitude of saw tooth |
| period |
Value: Type: Time (s) Description: Time for one period |
| nperiod |
Value: -1 Type: Integer Description: Number of periods (< 0 means infinite number of periods) |
Connectors (1)
 |
y |
Type: RealOutput Description: Connector of Real output signal |
|---|
Used in Components (2)
 |
Modelica.Electrical.PowerConverters.DCAC.Control Intersective PWM |
 |
Modelica.Electrical.PowerConverters.DCDC.Control Generates a pulse width modulated (PWM) boolean fire signal |