Init

Enumeration defining initialization of a block

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The following initialization alternatives are available:

NoInit: No initialization (start values are used as guess values with fixed=false)
SteadyState: Steady state initialization (derivatives of states are zero)
InitialState: Initialization with initial states
InitialOutput: Initialization with initial outputs (and steady state of the states if possible)

Enumeration Literals (4)

NoInit	No initialization (start values are used as guess values with fixed=false)
SteadyState	Steady state initialization (derivatives of states are zero)
InitialState	Initialization with initial states
InitialOutput	Initialization with initial outputs (and steady state of the states if possible)

Used in Examples (1)

Modelica.Blocks.Examples

Demonstrates the Continuous.Filter block with various options

Used in Components (15)

	Integrator Modelica.Blocks.Continuous Output the integral of the input signal with optional reset
	LimIntegrator Modelica.Blocks.Continuous Integrator with limited value of the output and optional reset
	Derivative Modelica.Blocks.Continuous Approximated derivative block
	FirstOrder Modelica.Blocks.Continuous First order transfer function block (= 1 pole)
	SecondOrder Modelica.Blocks.Continuous Second order transfer function block (= 2 poles)
	PI Modelica.Blocks.Continuous Proportional-Integral controller
	PID Modelica.Blocks.Continuous PID-controller in additive description form
	LimPID Modelica.Blocks.Continuous P, PI, PD, and PID controller with limited output, anti-windup compensation, setpoint weighting and optional feed-forward
	TransferFunction Modelica.Blocks.Continuous Linear transfer function
	StateSpace Modelica.Blocks.Continuous Linear state space system
	LowpassButterworth Modelica.Blocks.Continuous Output the input signal filtered with a low pass Butterworth filter of any order
	CriticalDamping Modelica.Blocks.Continuous Output the input signal filtered with an n-th order filter with critical damping
	Filter Modelica.Blocks.Continuous Continuous low pass, high pass, band pass or band stop IIR-filter of type CriticalDamping, Bessel, Butterworth or ChebyshevI
	SlewRateLimiter Modelica.Blocks.Nonlinear Limits the slew rate of a signal
	LimitedPI Modelica.Electrical.Machines.Examples.ControlledDCDrives.Utilities Limited PI-controller with anti-windup and feed-forward