PotentiometerAdjustable resistor |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This models a potentiometer where the sliding contact is placed between pin_n (r = 0) and pin_p (r = 1), dependent on either the parameter rConstant or the signal input r.
The total resistance R is temperature dependent.
useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
---|---|
T |
Value: T_ref Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
R |
Value: Type: Resistance (Ω) Description: Resistance at temperature T_ref |
T_ref |
Value: 293.15 Type: Temperature (K) Description: Reference temperature |
alpha |
Value: 0 Type: LinearTemperatureCoefficient (¹/K) Description: Temperature coefficient of resistance (R_actual = R*(1 + alpha*(T_heatPort - T_ref)) |
useRinput |
Value: false Type: Boolean Description: Use input for 0 |
rConstant |
Value: 0.5 Type: Real Description: Contact between n (r=0) and p (r=1) |
heatPort |
Type: HeatPort_a Description: Conditional heat port |
|
---|---|---|
pin_p |
Type: PositivePin |
|
contact |
Type: PositivePin |
|
pin_n |
Type: NegativePin |
|
r |
Type: RealInput |
rConst |
Type: Constant |
---|
Modelica.Electrical.Analog.Examples.OpAmps Comparator |