VariableConductorIdeal linear electrical conductor with variable conductance |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The linear conductor connects the branch voltage v with the branch current i by
i = G*v
The Conductance G is given as input signal.
Attention!!!
It is recommended that the G signal should not cross the zero value. Otherwise depending on the surrounding circuit the probability of singularities is high.
Parameters (4)
| useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
|---|---|
| T |
Value: T_ref Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
| T_ref |
Value: 300.15 Type: Temperature (K) Description: Reference temperature |
| alpha |
Value: 0 Type: LinearTemperatureCoefficient (ยน/K) Description: Temperature coefficient of conductance (G_actual = G/(1 + alpha*(T_heatPort - T_ref)) |
Connectors (4)
 |
p |
Type: PositivePin Description: Positive electrical pin |
|---|---|---|
 |
n |
Type: NegativePin Description: Negative electrical pin |
 |
heatPort |
Type: HeatPort_a Description: Conditional heat port |
 |
G |
Type: RealInput |
Used in Examples (1)
 |
Modelica.Electrical.QuasiStatic.SinglePhase.Examples Rectifier example |
Used in Components (1)
 |
Modelica.Electrical.Polyphase.Basic Ideal linear electrical conductors with variable conductance |