This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a (inverting) low pass filter. Resistance R1 can be chosen, resistance R2 is defined by the desired amplification k, capacitance C is defined by the desired cut-off frequency.

The example is taken from: U. Tietze and C. Schenk, Halbleiter-Schaltungstechnik (German), 11th edition, Springer 1999, Chapter 13.3

Note: vOut measure the negative output voltage.

Vin	Value: 5 Type: Voltage (V) Description: Amplitude of input voltage
f	Value: 10 Type: Frequency (Hz) Description: Frequency of input voltage
fG	Value: f / 10 Type: Frequency (Hz) Description: Limiting frequency