Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is an ideal thyristor, for details see partial model IdealSemiconductor
The thyristor is conducting if voltage > Vknee AND fire = true.
If fire gets false, the current has to fall below Vknee*Goff, then the thyristor gets locking.

Parameters (5)

useHeatPort	Value: false Type: Boolean Description: = true, if heatPort is enabled
T	Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false
Ron	Value: 1e-5 Type: Resistance (Ω) Description: Forward state-on differential resistance (closed resistance)
Goff	Value: 1e-5 Type: Conductance (S) Description: Backward state-off conductance (opened conductance)
Vknee	Value: 0 Type: Voltage (V) Description: Forward threshold voltage

Connectors (4)

	p	Type: PositivePin Description: Positive electrical pin
	n	Type: NegativePin Description: Negative electrical pin
	heatPort	Type: HeatPort_a Description: Conditional heat port
	fire	Type: BooleanInput

Used in Examples (1)

CharacteristicThyristors

Modelica.Electrical.Analog.Examples

Characteristic of ideal thyristors

Used in Components (7)

	IdealTriac Modelica.Electrical.Analog.Ideal Ideal triac, based on ideal thyristors
	IdealThyristor Modelica.Electrical.Polyphase.Ideal Polyphase ideal thyristor
	Thyristor1Pulse Modelica.Electrical.PowerConverters.Examples.ACDC.ExampleTemplates Template of single pulse rectifier
	ThyristorBridge2Pulse Modelica.Electrical.PowerConverters.ACDC Two pulse Graetz thyristor rectifier bridge
	HalfControlledBridge2Pulse Modelica.Electrical.PowerConverters.ACDC Two pulse Graetz half controlled rectifier bridge
	ThyristorCenterTap2Pulse Modelica.Electrical.PowerConverters.ACDC Two pulse thyristor rectifier with center tap
	SinglePhaseTriac Modelica.Electrical.PowerConverters.ACAC Triode for alternating current