Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

TwoPort is a partial model that consists of two ports. Like OnePort each port has two pins. It is assumed that the current flowing into the positive pin is identical to the current flowing out of pin n. This currents of each port are provided explicitly as currents i1 and i2, the voltages respectively as v1 and v2.

Connectors (4)

	p1	Type: PositivePin Description: Positive electrical pin of port 1
	n1	Type: NegativePin Description: Negative electrical pin of port 1
	p2	Type: PositivePin Description: Positive electrical pin of port 2
	n2	Type: NegativePin Description: Negative electrical pin of port 2

Extended by (10)

	TLine3 Modelica.Electrical.Analog.Lines Lossless transmission line with characteristic impedance Z0 and frequency F
	TLine2 Modelica.Electrical.Analog.Lines Lossless transmission line with characteristic impedance Z0, frequency F and normalized length NL
	TLine1 Modelica.Electrical.Analog.Lines Lossless transmission line with characteristic impedance Z0 and transmission delay TD
	IdealTransformer Modelica.Electrical.Analog.Ideal Ideal transformer core with or without magnetization
	CCC Modelica.Electrical.Analog.Basic Linear current-controlled current source
	CCV Modelica.Electrical.Analog.Basic Linear current-controlled voltage source
	VCC Modelica.Electrical.Analog.Basic Linear voltage-controlled current source
	VCV Modelica.Electrical.Analog.Basic Linear voltage-controlled voltage source
	Gyrator Modelica.Electrical.Analog.Basic Gyrator
	Transformer Modelica.Electrical.Analog.Basic Transformer with two ports