ExpSineCurrent

Exponentially damped sine current source

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This current source uses the corresponding signal source of the Modelica.Blocks.Sources package. Care for the meaning of the parameters in the Blocks package. Furthermore, an offset parameter is introduced, which is added to the value calculated by the blocks source. The startTime parameter allows to shift the blocks source behavior on the time axis.

ExpSineCurrent.png

Parameters (6)

offset

Value: 0

Type: Current (A)

Description: Current offset

startTime

Value: 0

Type: Time (s)

Description: Time offset

I

Value:

Type: Real

Description: Amplitude of sine wave

f

Value:

Type: Frequency (Hz)

Description: Frequency of sine wave

phase

Value: 0

Type: Angle (rad)

Description: Phase of sine wave

damping

Value:

Type: Damping (s⁻¹)

Description: Damping coefficient of sine wave

Connectors (2)

p

Type: PositivePin

Description: Positive electrical pin

n

Type: NegativePin

Description: Negative electrical pin

Components (1)

signalSource

Type: ExpSine