Cell

Cell with measurement

Diagram

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a single cell[Np=1, Ns=1] with measurement.

useHeatPort	Value: false Type: Boolean Description: =true, if HeatPort is enabled
T	Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false
cellData	Value: Type: CellData Description: Cell parameters
SOC0	Value: 0.1 Type: Real Description: Initial SOC
SOCtolerance	Value: 1e-9 Type: Real Description: SOC tolerance for detection of depleted or overcharged cell

displaySOC	Default Value: SOC Type: Real Description: SOC for display

displaySOC

Default Value: SOC

Type: Real

Description: SOC for display

i	Default Value: p.i Type: Current (A) Description: Current into the cell
power	Default Value: v * i Type: Power (W) Description: Power to the cell
SOC	Default Value: limIntegrator.y Type: Real Description: State of charge

Default Value: p.i

Type: Current (A)

Description: Current into the cell

power

Default Value: v * i

Type: Power (W)

Description: Power to the cell

SOC

Default Value: limIntegrator.y

Type: Real

Description: State of charge

	p	Type: PositivePin Description: Positive electrical pin
	n	Type: NegativePin Description: Negative electrical pin
	heatPort	Type: HeatPort_a Description: Optional port to which dissipated losses are transported in form of heat
	cellBus	Type: CellBus Description: Cell bus

	fixedTemperature	Type: FixedTemperature
	cellData	Type: CellData Description: Cell parameters
	cell	Type: CellStack Description: Cell
	multiSensor	Type: MultiSensor
	limIntegrator	Type: LimIntegrator
	temperatureSensor	Type: TemperatureSensor
	heatFlowSensor	Type: HeatFlowSensor

Modelica.Electrical.Batteries.Examples

Charge a cell with constant current - constant voltage characteristic