This information is part of the Modelica Standard Library maintained by the Modelica Association.

Sets a nine valued digital signal, which is specified by the setval parameter.

To specify setval, the integer code has to be used.

Code Table

Logic value	Integer code	Meaning
'U'	1	Uninitialized
'X'	2	Forcing Unknown
'0'	3	Forcing 0
'1'	4	Forcing 1
'Z'	5	High Impedance
'W'	6	Weak Unknown
'L'	7	Weak 0
'H'	8	Weak 1
'-'	9	Do not care

If the logic values are imported by
import L = Digital.Interfaces.Logic;
they can be used to specify the parameter, e.g., L.'0' for forcing 0.

x	Value: Type: Logic Description: Logic value to be set