SpeedControlledDCPM

Speed controlled DC PM drive with H-bridge from battery

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This model demonstrates how a speed controller for a current controlled DC PM drive works.

The inner current controller is parameterized according to the absolute optimum. The outer control loop is formed by the speed controller which is parameterized according to the symmetrical optimum.

At time=0.2 s a reference speed step is applied, causing the drive to accelerate to the desired speed. At time=0.8 s a load torque step is applied, causing the drive to decelerate until the speed controller brings the drive back to the desired speed.

You may try a slewRateLimiter instead of the prefilter to limit the speed rise i.e. the torque.

Further reading: Tutorial at the Modelica Conference 2017

Parameters (1)

driveData

Value:

Type: DriveDataDCPM

Description: DC machine data

Components (13)

driveData

Type: DriveDataDCPM

Description: DC machine data

loadInertia

Type: Inertia

speedSensor

Type: SpeedSensor

dcpm

Type: DC_PermanentMagnet

armatureInverter

Type: DcdcInverter

source

Type: Battery

currentController

Type: LimitedPI

tau2i

Type: Gain

loadTorque

Type: TorqueStep

speedController

Type: LimitedPI

preFilter

Type: FirstOrder

step

Type: Step

slewRateLimiter

Type: SlewRateLimiter