IMS_Start

Test example: InductionMachineSlipRing

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

At start time tStart1 three-phase voltage is supplied to the induction machine with sliprings; the machine starts from standstill, accelerating inertias against load torque quadratic dependent on speed, using a starting resistance. At time tStart2 external rotor resistance is shortened, finally reaching nominal speed.

Simulate for 1.5 seconds and plot (versus time):

  • currentQuasiRMSSensor.I: stator current RMS
  • aims.wMechanical: motor's speed
  • aims.tauElectrical: motor's torque

Default machine parameters are used.

Parameters (9)

VNominal

Value: 100

Type: Voltage (V)

Description: Nominal RMS voltage per phase

fNominal

Value: 50

Type: Frequency (Hz)

Description: Nominal frequency

tStart1

Value: 0.1

Type: Time (s)

Description: Start time

Rstart

Value: 0.16 / aimsData.turnsRatio ^ 2

Type: Resistance (Ω)

Description: Starting resistance

tStart2

Value: 1.0

Type: Time (s)

Description: Start time of shorting starting resistance

TLoad

Value: 161.4

Type: Torque (N·m)

Description: Nominal load torque

wLoad

Value: 1440.45 * 2 * Modelica.Constants.pi / 60

Type: AngularVelocity (rad/s)

Description: Nominal load speed

JLoad

Value: 0.29

Type: Inertia (kg·m²)

Description: Load's moment of inertia

aimsData

Value:

Type: IM_SlipRingData

Description: Induction machine data

Components (12)

aims

Type: IM_SlipRing

currentQuasiRMSSensor

Type: CurrentQuasiRMSSensor

sineVoltage

Type: SineVoltage

star

Type: Star

ground

Type: Ground

booleanStep

Type: BooleanStep[m]

idealCloser

Type: IdealClosingSwitch

loadInertia

Type: Inertia

quadraticLoadTorque

Type: QuadraticSpeedDependentTorque

terminalBox

Type: TerminalBox

switchedRheostat

Type: SwitchedRheostat

aimsData

Type: IM_SlipRingData

Description: Induction machine data