PartialBasicDCMachinePartial model for DC machine |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Partial model for DC machine models.Jr |
Value: Type: Inertia (kg·m²) Description: Rotor's moment of inertia |
---|---|
useSupport |
Value: false Type: Boolean Description: Enable / disable (=fixed stator) support |
Js |
Value: Jr Type: Inertia (kg·m²) Description: Stator's moment of inertia |
useThermalPort |
Value: false Type: Boolean Description: Enable / disable (=fixed temperatures) thermal port |
frictionParameters |
Value: Type: FrictionParameters Description: Friction loss parameter record |
TaOperational |
Value: Type: Temperature (K) Description: Operational armature temperature |
VaNominal |
Value: Type: Voltage (V) Description: Nominal armature voltage |
IaNominal |
Value: Type: Current (A) Description: Nominal armature current (>0..Motor, <0..Generator) |
wNominal |
Value: Type: AngularVelocity (rad/s) Description: Nominal speed |
TaNominal |
Value: Type: Temperature (K) Description: Nominal armature temperature |
Ra |
Value: Type: Resistance (Ω) Description: Armature resistance at TaRef |
TaRef |
Value: Type: Temperature (K) Description: Reference temperature of armature resistance |
alpha20a |
Value: Type: LinearTemperatureCoefficient20 (¹/K) Description: Temperature coefficient of armature resistance |
La |
Value: Type: Inductance (H) Description: Armature inductance |
coreParameters |
Value: Type: CoreParameters Description: Armature core loss parameter record |
strayLoadParameters |
Value: Type: StrayLoadParameters Description: Stray load loss parameter record |
brushParameters |
Value: Type: BrushParameters Description: Brush loss parameter record |
phiMechanical |
Default Value: flange.phi - internalSupport.phi Type: Angle (rad) Description: Mechanical angle of rotor against stator |
---|---|
wMechanical |
Default Value: der(phiMechanical) Type: AngularVelocity (rad/s) Description: Mechanical angular velocity of rotor against stator |
tauElectrical |
Default Value: inertiaRotor.flange_a.tau Type: Torque (N·m) Description: Electromagnetic torque |
tauShaft |
Default Value: -flange.tau Type: Torque (N·m) Description: Shaft torque |
powerBalance |
Type: PartialPowerBalanceDCMachines Description: Power balance |
va |
Default Value: pin_ap.v - pin_an.v Type: Voltage (V) Description: Armature voltage |
ia |
Default Value: pin_ap.i Type: Current (A) Description: Armature current |
flange |
Type: Flange_a Description: Shaft |
|
---|---|---|
support |
Type: Flange_a Description: Support at which the reaction torque is acting |
|
pin_ap |
Type: PositivePin Description: Positive armature pin |
|
pin_an |
Type: NegativePin Description: Negative armature pin |
|
thermalPort |
frictionParameters |
Type: FrictionParameters Description: Friction loss parameter record |
|
---|---|---|
inertiaRotor |
Type: Inertia |
|
inertiaStator |
Type: Inertia |
|
fixed |
Type: Fixed |
|
friction |
Type: Friction |
|
coreParameters |
Type: CoreParameters Description: Armature core loss parameter record |
|
strayLoadParameters |
Type: StrayLoadParameters Description: Stray load loss parameter record |
|
brushParameters |
Type: BrushParameters Description: Brush loss parameter record |
|
powerBalance |
Type: PartialPowerBalanceDCMachines Description: Power balance |
|
ra |
Type: Resistor |
|
la |
Type: InductorDC |
|
brush |
Type: Brush |
|
core |
Type: Core |
|
strayLoad |
Type: StrayLoad |
|
thermalAmbient |
Modelica.Electrical.Machines.BasicMachines.DCMachines Series excited linear DC machine |
|
Modelica.Electrical.Machines.BasicMachines.DCMachines Electrical shunt/separate excited linear DC machine |
|
Modelica.Electrical.Machines.BasicMachines.DCMachines Permanent magnet DC machine |