ToDQTransform instantaneous stator inputs to rotor fixed space phasor |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The polyphase input values u[m] are transformed to the corresponding space phasor which is rotated to the rotor fixed reference system,
using the provided mechanical rotor angle phi. The output are the resulting d and q components of the space phasor arranged in one vector y[2].
See also
Parameters (4)
| nin |
Value: m Type: Integer Description: Number of inputs |
|---|---|
| nout |
Value: 2 Type: Integer Description: Number of outputs |
| m |
Value: 3 Type: Integer Description: Number of phases |
| p |
Value: Type: Integer Description: Number of pole pairs |
Connectors (3)
 |
u |
Type: RealInput[nin] Description: Connector of Real input signals |
|---|---|---|
 |
y |
Type: RealOutput[nout] Description: Connector of Real output signals |
|
phi |
Type: RealInput |
Components (3)
 |
toGamma |
Type: Gain |
|---|---|---|
 |
rotator |
Type: Rotator |
 |
toSpacePhasor |
Type: ToSpacePhasor |
Used in Components (1)
 |
Modelica.Electrical.Machines.Utilities Current controller in dq coordinate system |