RectifierTest example with polyphase components |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Test example with polyphase components:
Star-connected voltage source feeds via a line reactor a diode bridge rectifier with a DC burden.
Using f=50 Hz, simulate for 0.1 second and compare voltages and currents of source and DC burden, neglecting initial transient.
We may also compare: Active power measured by powerSensor, powerSensorSpacePhasor and aronSensor,
as well as reactive power measured by powerSensorSpacePhasor and reactivePowerSensor.
m |
Value: 3 Type: Integer Description: Number of phases |
---|---|
V |
Value: 100 Type: Voltage (V) Description: RMS of Star-Voltage |
f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
L |
Value: 0.0001 Type: Inductance (H) Description: Line Inductance |
RL |
Value: 2 Type: Resistance (Ω) Description: Load Resistance |
C |
Value: 0.005 Type: Capacitance (F) Description: Total DC-Capacitance |
RE |
Value: 1E6 Type: Resistance (Ω) Description: Earthing Resistance |
Ron |
Value: 1e-5 Type: Resistance (Ω) Description: Closed diode resistance |
Goff |
Value: 1e-5 Type: Conductance (S) Description: Opened diode conductance |
Vknee |
Value: 0 Type: Voltage (V) Description: Threshold diode voltage |
VDC |
Value: factorY2DC(m) * V Type: Voltage (V) Description: Estimated average DC voltage |
IDC |
Value: VDC / RL Type: Current (A) Description: Estimated average DC current |
sineVoltage |
Type: SineVoltage |
|
---|---|---|
starS |
Type: Star |
|
supplyL |
Type: Inductor |
|
idealDiode1 |
Type: IdealDiode |
|
star1 |
Type: Star |
|
idealDiode2 |
Type: IdealDiode |
|
star2 |
Type: Star |
|
loadR |
Type: Resistor |
|
cDC1 |
Type: Capacitor |
|
cDC2 |
Type: Capacitor |
|
groundDC |
Type: Ground |
|
powerSensorSpacePhasor |
Type: ElectricalPowerSensor |
|
aronSensor |
Type: AronSensor |
|
powerSensor |
Type: PowerSensor |
|
reactivePowerSensor |
Type: ReactivePowerSensor |