DiodeCenterTapmPulse

m pulse diode rectifier with center tap

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

General information about AC/DC converters can be found at the AC/DC converter concept.

This is a m pulse diode rectifier with center tap. All voltage sources must have one interconnected plug (tap). This rectifiers works only with odd number of phases due the symmetry constrains of even phase numbers implemented in symmetricOrientation. The circuit topology is the same as in Examples.ACDC.RectifierCenterTapmPulse.

Parameters (6)

useHeatPort

Value: false

Type: Boolean

Description: = true, if heatPort is enabled

T

Value: 293.15

Type: Temperature (K)

Description: Fixed device temperature if useHeatPort = false

m

Value: 3

Type: Integer

Description: Number of phases

RonDiode

Value: 1e-05

Type: Resistance (Ω)

Description: Closed diode resistance

GoffDiode

Value: 1e-05

Type: Conductance (S)

Description: Opened diode conductance

VkneeDiode

Value: 0

Type: Voltage (V)

Description: Diode forward threshold voltage

Connectors (3)

ac

Type: PositivePlug

Description: AC input

dc_p

Type: PositivePin

Description: Positive DC output

heatPort

Type: HeatPort_a

Description: Conditional heat port

Components (3)

diode

Type: IdealDiode

Description: Diodes connected to positive DC potential

star

Type: Star

thermalCollector

Type: ThermalCollector

Used in Examples (1)

DiodeCenterTapmPulse

Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTapmPulse

2*m pulse diode rectifier with center tap with resistive load