HalfControlledBridge2PulseTwo pulse Graetz half controlled bridge with resistive load |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This examples shows a two pulse half controlled bridge example with resistive load. In case of resistive load the half controlled bridge shows the same output voltage as the full controlled bridge.
Plot current currentSensor.i
, average current meanCurrent.y
, voltage voltageSensor.v
and average voltage meanVoltage.v
.
Vrms |
Value: 110 Type: Voltage (V) Description: RMS supply voltage |
---|---|
f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
constantFiringAngle |
Value: 30 * pi / 180 Type: Angle (rad) Description: Firing angle |
R |
Value: 20 Type: Resistance (Ω) Description: Load resistance |
ground |
Type: Ground |
|
---|---|---|
sinevoltage |
Type: SineVoltage |
|
rectifier | ||
voltagesensor |
Type: VoltageSensor |
|
meanVoltage |
Type: Mean |
|
rootMeanSquareVoltage |
Type: RootMeanSquare |
|
currentSensor |
Type: CurrentSensor |
|
meanCurrent |
Type: Mean |
|
pulse2 |
Type: VoltageBridge2Pulse |
|
resistor |
Type: Resistor |