SinglePhaseTwoLevel_RLSingle-phase DC to AC converter with R-L load |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Plot current currentSensor.i
, average current meanCurrent.y
, voltage voltageSensor.v
and average voltage meanVoltage.v
. The instantaneous voltage directly show the switch pattern of the inverter. The current shows a particular ripple determined by the input voltage and the switching frequency. The average voltage is basically in phase with the command sine.y
. The average current has a phase shift due to the R-L load.
f |
Value: 1000 Type: Frequency (Hz) Description: Switching frequency |
---|---|
R |
Value: 100 Type: Resistance (Ω) Description: Resistance |
L |
Value: 1 Type: Inductance (H) Description: Inductance |
f1 |
Value: 50 Type: Frequency (Hz) Description: AC frequency |
constantVoltage_n |
Type: ConstantVoltage |
|
---|---|---|
inverter |
Type: SinglePhase2Level |
|
currentSensor |
Type: CurrentSensor |
|
voltageSensor |
Type: VoltageSensor |
|
ground |
Type: Ground |
|
signalPWM |
Type: SignalPWM |
|
constantVoltage_p |
Type: ConstantVoltage |
|
sine |
Type: Sine |
|
fundamentalWaveVoltage |
Type: Harmonic |
|
fundamentalWaveCurrent |
Type: Harmonic |
|
resistor |
Type: Resistor |
|
inductor |
Type: Inductor |