HBridge_RLH bridge DC/DC converter with R-L load |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example demonstrates the switching on of an R-L load operated by an H bridge.
DC output voltage is equal to 2 * (dutyCycle - 0.5)
times the input voltage.
Plot current currentSensor.i
, averaged current meanCurrent.y
, total voltage voltageSensor.v
and voltage meanVoltage.v
. The waveform the average current is determined by the time constant L/R
of the load.
f |
Value: 1000 Type: Frequency (Hz) Description: Switching frequency |
---|---|
R |
Value: 100 Type: Resistance (Ω) Description: Resistance |
L |
Value: 1 Type: Inductance (H) Description: Inductance |
hbridge |
Type: HBridge |
|
---|---|---|
constantVoltage |
Type: ConstantVoltage |
|
signalPWM |
Type: SignalPWM |
|
ground |
Type: Ground |
|
currentSensor |
Type: CurrentSensor |
|
voltageSensor |
Type: VoltageSensor |
|
meanCurrent |
Type: Mean |
|
meanVoltage |
Type: Mean |
|
resistor |
Type: Resistor |
|
inductor |
Type: Inductor |