Enable1Partial model providing enable parameter and optional enable input for one firing signal |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This partial model provides the enabling logic for one firing signal.
Parameters (3)
| useConstantEnable |
Value: true Type: Boolean Description: Disable boolean input and use constantEnable, if true |
|---|---|
| constantEnable |
Value: true Type: Boolean Description: Constant enabling of firing signals |
| m |
Value: 1 Type: Integer Description: Number of phases |
Connectors (2)
 |
enable |
Type: BooleanInput Description: Enables fire and notFire |
|---|---|---|
|
fire_p |
Type: BooleanInput Description: Firing signal of positive potential transistor |
Components (2)
 |
enableLogic |
Type: EnableLogic Description: Enabling logic |
|---|---|---|
 |
andCondition_p |
Type: And Description: And condition for positive firing signal |
Extended by (3)
 |
Modelica.Electrical.PowerConverters.Interfaces.Enable Partial model providing enable parameter and optional enable input for two firing signals |
 |
Modelica.Electrical.PowerConverters.DCDC Step up chopper |
 |
Modelica.Electrical.PowerConverters.DCDC Step down chopper |