VariableConductorPolyphase variable conductor |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The linear resistors connect the complex currents i with the complex
voltages v by v*G = i,
using m single-phase variable Conductors.
The conductances G are given as m input signals.
The conductor model also has m optional
conditional heat ports.
A linear temperature dependency of the conductances is also taken into account.
See also
VariableConductor, Resistor, Conductor, Capacitor, Inductor, Impedance, Admittance, Variable resistor, Variable capacitor, Variable inductor Variable impedance, Variable admittance
Parameters (6)
| m |
Value: 3 Type: Integer Description: Number of phases |
|---|---|
| mh |
Value: m Type: Integer Description: Number of heatPorts=number of phases |
| useHeatPort |
Value: false Type: Boolean Description: = true, if all heat ports are enabled |
| T |
Value: T_ref Type: Temperature[mh] (K) Description: Fixed device temperatures if useHeatPort = false |
| T_ref |
Value: fill(293.15, m) Type: Temperature[m] (K) Description: Reference temperatures |
| alpha_ref |
Value: zeros(m) Type: LinearTemperatureCoefficient[m] (ยน/K) Description: Temperature coefficient of resistance (G_actual = G_ref/(1 + alpha_ref*(heatPort.T - T_ref)) |
Connectors (4)
 |
plug_p |
Type: PositivePlug Description: Positive quasi-static polyphase plug |
|---|---|---|
 |
plug_n |
Type: NegativePlug Description: Negative quasi-static polyphase plug |
 |
heatPort |
Type: HeatPort_a[mh] Description: Conditional heat ports |
 |
G_ref |
Type: RealInput[m] Description: Variable conductance |
Components (5)
 |
plugToPins_p |
Type: PlugToPins_p |
|---|---|---|
 |
plugToPins_n |
Type: PlugToPins_n |
 |
v |
Type: ComplexVoltage[m] Description: Complex voltage |
 |
i |
Type: ComplexCurrent[m] Description: Complex current |
 |
variableConductor |
Type: VariableConductor[m] |