OnePort

Two plugs, reference connection and declaration of voltage and current

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This partial model uses a positive and negative plug and defines the complex voltage differences as well as the complex currents (into the positive plug). A positive and a negative adapter are used to give easy access to the single pins of both plugs. Additionally, the angular velocity of the quasi-static system is explicitly defined as variable. This model is mainly intended to be used with textual representation of user models.

See also

PositivePlug, NegativePlug, TwoPlug, OnePort

Parameters (1)

m

Value: 3

Type: Integer

Description: Number of phases

Connectors (2)

plug_p

Type: PositivePlug

Description: Positive quasi-static polyphase plug
plug_n

Type: NegativePlug

Description: Negative quasi-static polyphase plug

Components (2)

v

Type: ComplexVoltage[m]

Description: Complex voltage
i

Type: ComplexCurrent[m]

Description: Complex current

Extended by (4)

StrayLoad

Modelica.Magnetic.QuasiStatic.FundamentalWave.Losses

Model of stray load losses dependent on current and speed

ReferenceSource

Modelica.Electrical.QuasiStatic.Polyphase.Interfaces

Partial of voltage or current source with reference input

Source

Modelica.Electrical.QuasiStatic.Polyphase.Interfaces

Partial voltage / current source

MutualInductor

Modelica.Electrical.QuasiStatic.Polyphase.Basic

Linear mutual inductor