H_CCV

Linear current-controlled voltage source

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The linear current-controlled voltage source is a TwoPort. The "right" port voltage at pin 2 (=p2.v) is controlled by the "left" port current at pin p1(=p1.i) via

p2.v = p1.i * transResistance.

The controlling port voltage is zero. Any transResistance can be chosen. The corresponding SPICE description

Hname N+ N- VNAM VALUE

is translated to Modelica:

Hname -> Spice3.Basic.H_CCV Hname
(Hname is the name of the Modelica instance)
N+ -> p2.v
N- -> n2.v

The voltage source VNAM has the two nodes NV+ and NV-:

VNAM VN+ VN- VALUE_V

The current through VNAM hast to be led through the CCV. Therefore VNAM has to be disconnected and an additional node NV_AD has to be added.

NV_AD -> p1.i
NV- -> n1.i

On this way the current, that flows through the voltage source VNAM, flows through the CCV.

VALUE -> transResistance

Parameters (1)

transResistance

Value:

Type: Resistance (Ω)

Description: Transresistance

Connectors (4)

p1

Type: PositivePin

Description: Positive pin of the controlling port

n1

Type: NegativePin

Description: Negative pin of the controlling port

p2

Type: PositivePin

Description: Positive pin of the controlled port

n2

Type: NegativePin

Description: Negative pin of the controlled port