ModelcardJFETRecord for the specification of modelcard parameters for JFET |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Technology parameters of the junction field-effect transistor model.
In modelcards, that are typical for SPICE3, the so called technology parameters are stored. These parameters are usually set for more than one semiconductor device in a circuit, e.g., the temperature of a whole electrical circuit.
CGS |
Value: -1e40 Type: Capacitance (F) Description: Zero-bias G-S junction capacitance, default 0 |
---|---|
CGD |
Value: -1e40 Type: Capacitance (F) Description: Zero-bias G-D junction capacitance, default 0 |
IS |
Value: 1e-14 Type: Current (A) Description: Saturation current of pn junctions |
FC |
Value: 0.5 Type: Real Description: Coefficient for forward-bias depletion capacitance formula |
RD |
Value: -1e40 Type: Resistance (Ω) Description: Drain ohmic resistance, default 0 |
RS |
Value: -1e40 Type: Resistance (Ω) Description: Source ohmic resistance, default 0 |
TNOM |
Value: 27 Type: Temperature_degC (°C) Description: Parameter measurement temperature |
VTO |
Value: -1e40 Type: Voltage (V) Description: Zero-bias threshold voltage, default -2 |
B |
Value: -1e40 Type: InversePotential (¹/V) Description: Dotierungsverlauf parameter, default 1 |
BETA |
Value: -1e40 Type: Real Description: Output admittance parameter, default 1e-4 |
LAMBDA |
Value: 0 Type: InversePotential (¹/V) Description: Channel-length modulation, default 0 |
PB |
Value: 1.0 Type: Voltage (V) Description: Junction potential of pn junctions |
AF |
Value: 1.0 Type: Real Description: Flicker noise exponent |
KF |
Value: 0 Type: Real Description: Flicker noise coefficient |