IdealHeatTransferIdealHeatTransfer: Ideal heat transfer without thermal resistance |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Ideal heat transfer without thermal resistance.Parameters (4)
| n |
Value: 1 Type: Integer Description: Number of heat transfer segments |
|---|---|
| use_k |
Value: false Type: Boolean Description: = true to use k value for thermal isolation |
| k |
Value: 0 Type: CoefficientOfHeatTransfer (W/(m²·K)) Description: Heat transfer coefficient to ambient |
| T_ambient |
Value: system.T_ambient Type: Temperature (K) Description: Ambient temperature |
Inputs (2)
| states |
Type: ThermodynamicState[n] Description: Thermodynamic states of flow segments |
|---|---|
| surfaceAreas |
Type: Area[n] (m²) Description: Heat transfer areas |
Outputs (1)
| Q_flows |
Type: HeatFlowRate[n] (W) Description: Heat flow rates |
|---|
Connectors (1)
 |
heatPorts |
Type: HeatPorts_a[n] Description: Heat port to component boundary |
|---|
Components (2)
 |
states |
Type: ThermodynamicState[n] Description: Thermodynamic states of flow segments |
|---|---|---|
 |
system |
Type: System Description: System wide properties |
Extended by (4)
 |
Modelica.Fluid.Machines.BaseClasses.PartialPump Wall heat transfer |
 |
Modelica.Fluid.Vessels.BaseClasses.PartialLumpedVessel Wall heat transfer |
 |
Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses.TankWithTopPorts Wall heat transfer |
 |
Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses.TankWith3InletOutletArraysWithEvaporatorCondensor Wall heat transfer |