GenericHystTellinenTable

Generic flux tube with ferromagnetic hysteresis based on the Tellinen model and table data

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Flux tube element for modeling magnetic materials with ferromagnetic and dynamic hysteresis (eddy currents). The ferromagnetic hysteresis behavior is defined by the Tellinen hysteresis model. The rising and falling branch of the limiting ferromagnetic hysteresis loop are specified by table data. Therefore, almost any hysteresis shapes are possible. A library with predefined tables can be found at FluxTubes.Material.HysteresisTableData.

An overview of all available hysteresis and permanent magnet elements of the package HysteresisAndMagnets can be found in UsersGuide.Hysteresis.

Parameters (10)

l	Value: 0.1 Type: Length (m) Description: Length in direction of flux
A	Value: 1e-4 Type: Area (m²) Description: Area of cross section
V	Value: A * l Type: Volume (m³) Description: Volume of FluxTube
useHeatPort	Value: false Type: Boolean Description: = true, if HeatPort is enabled
T	Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false
includeEddyCurrents	Value: false Type: Boolean Description: = true, if eddy current losses are enabled
sigma	Value: mat.sigma Type: Conductivity (S/m) Description: Conductivity of core material
d	Value: 0.5e-3 Type: Length (m) Description: Thickness of lamination
mat	Value: FluxTubes.Material.HysteresisTableData.BaseData() Type: BaseData Description: Material properties
K	Value: 1 Type: Real Description: Slope of hysteresis in the saturation region (K*mu_0)

Outputs (8)

H	Type: MagneticFieldStrength (A/m) Description: Magnetic field strength
Hstat	Type: MagneticFieldStrength (A/m) Description: Static (ferromagnetic) portion of the magnetic field strength
Heddy	Type: MagneticFieldStrength (A/m) Description: Dynamic (eddy currents) portion of the magnetic field strength
B	Type: MagneticFluxDensity (T) Description: Magnetic flux density
MagRel	Type: Real Description: Relative magnetization at initialization (-1..1)
LossPowerStat	Type: Power (W) Description: Ferromagnetic (static) hysteresis losses
LossPowerEddy	Type: Power (W) Description: Eddy current losses (dynamic hysteresis losses)
asc	Type: Boolean Description: True when der(Hstat)>0

Connectors (3)

	port_p	Type: PositiveMagneticPort Description: Positive magnetic port
	port_n	Type: NegativeMagneticPort Description: Negative magnetic port
	heatPort	Type: HeatPort_a