IMC_DOL_PolyphaseDirect on line start of polyphase induction machine with squirrel cage |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
At start time tStart voltages are supplied to the polyphase induction machines with squirrel cage. The machines starts from standstill, accelerating inertias against load torque quadratic dependent on speed, finally reaching nominal speed. Two equivalent machines with different numbers of phases are compared and their equal behavior is demonstrated.
Simulate for 1.5 seconds and plot (versus time):
aimcM|M3.tauElectrical
: machine torqueaimsM/M3.wMechanical
: machine speedfeedback.y
: zero since difference of three-phase current phasor and scaled polyphase current phasor are equalm |
Value: 5 Type: Integer Description: Number of stator phases |
---|---|
VsNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
fNominal |
Value: aimcData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
tOn |
Value: 0.1 Type: Time (s) Description: Start time of machine |
T_Load |
Value: 161.4 Type: Torque (N·m) Description: Nominal load torque |
w_Load |
Value: 1440.45 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed |
J_Load |
Value: 0.29 Type: Inertia (kg·m²) Description: Load inertia |
p |
Value: 2 Type: Integer Description: Number of pole pairs |
aimcData |
Value: Type: IM_SquirrelCageData Description: Induction machine data |
groundM |
Type: Ground |
|
---|---|---|
starM |
Type: Star |
|
sineVoltageM |
Type: SineVoltage |
|
idealCloserM |
Type: IdealClosingSwitch |
|
booleanStepM |
Type: BooleanStep[m] |
|
currentRMSsensorM |
Type: CurrentQuasiRMSSensor |
|
terminalBoxM |
Type: TerminalBox |
|
aimcM |
Type: IM_SquirrelCage |
|
loadInertiaM |
Type: Inertia |
|
quadraticLoadTorqueM | ||
aimcData |
Type: IM_SquirrelCageData Description: Induction machine data |
|
ground3 |
Type: Ground |
|
star3 |
Type: Star |
|
sineVoltage3 |
Type: SineVoltage |
|
idealCloser3 |
Type: IdealClosingSwitch |
|
booleanStep3 |
Type: BooleanStep[m3] |
|
currentRMSsensor3 |
Type: CurrentQuasiRMSSensor |
|
terminalBox3 |
Type: TerminalBox |
|
aimc3 |
Type: IM_SquirrelCage |
|
loadInertia3 |
Type: Inertia |
|
quadraticLoadTorque3 | ||
gain |
Type: Gain |
|
feedback |
Type: Feedback |