IMS_Start_PolyphaseStarting of polyphase induction machine with slip rings |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
At start time tOn
voltages are supplied to the
induction machines with sliprings.
The two machine start from standstill, accelerating inertias against load torque quadratic dependent on speed,
using a starting resistance. At time tRheostat external rotor resistance is shortened, finally reaching nominal speed. Two equivalent machines with different numbers of phases are compared and their equal behavior is demonstrated.
Simulate for 1.5 seconds and plot (versus time):
aimcM|M3.tauElectrical
: machine torqueaimsM|M3.wMechanical
: machine speedfeedback.y
: zero since difference of three-phase current phasor and scaled polyphase current phasor are equalm |
Value: 5 Type: Integer Description: Number of stator phases |
---|---|
mr |
Value: 5 Type: Integer Description: Number of rotor phases |
VsNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
fNominal |
Value: aimsData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
tOn |
Value: 0.1 Type: Time (s) Description: Start time of machine |
RStart |
Value: 0.16 / aimsData.turnsRatio ^ 2 Type: Resistance (Ω) Description: Starting resistance |
tRheostat |
Value: 1.0 Type: Time (s) Description: Time of shortening the rheostat |
T_Load |
Value: 161.4 Type: Torque (N·m) Description: Nominal load torque |
w_Load |
Value: Modelica.Units.Conversions.from_rpm(1440.45) Type: AngularVelocity (rad/s) Description: Nominal load speed |
J_Load |
Value: 0.29 Type: Inertia (kg·m²) Description: Load inertia |
aimsData |
Value: Type: IM_SlipRingData Description: Induction machine data |
terminalBoxM |
Type: TerminalBox |
|
---|---|---|
terminalBox3 |
Type: TerminalBox |
|
aimsM |
Type: IM_SlipRing |
|
aims3 |
Type: IM_SlipRing |
|
rheostatM |
Type: SwitchedRheostat |
|
rheostat3 |
Type: SwitchedRheostat |
|
loadInertiaM |
Type: Inertia |
|
loadInertia3 |
Type: Inertia |
|
quadraticLoadTorqueM | ||
quadraticLoadTorque3 | ||
aimsData |
Type: IM_SlipRingData Description: Induction machine data |
|
groundM |
Type: Ground |
|
starM |
Type: Star |
|
sineVoltageM |
Type: SineVoltage |
|
idealCloserM |
Type: IdealClosingSwitch |
|
booleanStepM |
Type: BooleanStep[m] |
|
currentRMSsensorM |
Type: CurrentQuasiRMSSensor |
|
ground3 |
Type: Ground |
|
star3 |
Type: Star |
|
sineVoltage3 |
Type: SineVoltage |
|
idealCloser3 |
Type: IdealClosingSwitch |
|
booleanStep3 |
Type: BooleanStep[m3] |
|
currentRMSsensor3 |
Type: CurrentQuasiRMSSensor |
|
gain |
Type: Gain |
|
feedback |
Type: Feedback |