This information is part of the Modelica Standard Library maintained by the Modelica Association.

At start time tStart1 three-phase voltage is supplied to the induction machine with squirrel cage via the transformer; the machine starts from standstill, accelerating inertias against load torque quadratic dependent on speed; at start time tStart2 the machine is fed directly from the voltage source, finally reaching nominal speed.

Simulate for 2.5 seconds and plot (versus time):

• currentQuasiRMSSensor.I: stator current RMS
• aimc.wMechanical: motor's speed
• aimc.tauElectrical: motor's torque

Default machine parameters are used.

VNominal	Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase
fNominal	Value: aimcData.fsNominal Type: Frequency (Hz) Description: Nominal frequency
tStart1	Value: 0.1 Type: Time (s) Description: Start time
tStart2	Value: 2.0 Type: Time (s) Description: Start time of bypass transformer
TLoad	Value: 161.4 Type: Torque (N·m) Description: Nominal load torque
wLoad	Value: 1440.45 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed
JLoad	Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia
transformerData	Value: Type: TransformerData Description: Transformer data
aimcData	Value: Type: IM_SquirrelCageData Description: Induction machine data