SMPM_CurrentSource

Test example: PermanentMagnetSynchronousMachine fed by current source

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

A synchronous machine with permanent magnets accelerates a quadratic speed dependent load from standstill. The rms values of d- and q-current in rotor fixed coordinate system are converted to three-phase currents, and fed to the machine. The result shows that the torque is influenced by the q-current, whereas the stator voltage is influenced by the d-current.

Default machine parameters are used.

Parameters (5)

Idq

Value: {-53.5, 84.6}

Type: Current[2] (A)

Description: Desired d- and q-current

wNominal

Value: 2 * pi * smpmData.fsNominal / smpmData.p

Type: AngularVelocity (rad/s)

Description: Nominal speed

TLoad

Value: 181.4

Type: Torque (N·m)

Description: Nominal load torque

JLoad

Value: 0.29

Type: Inertia (kg·m²)

Description: Load's moment of inertia

smpmData

Value:

Type: SM_PermanentMagnetData

Description: Synchronous machine data

Components (19)

smpm

Type: SM_PermanentMagnet

signalCurrent

Type: SignalCurrent

star

Type: Star

ground

Type: Ground

dqToThreePhase

Type: DQToThreePhase

iq

Type: Constant

id

Type: Constant

voltageQuasiRMSSensor

Type: VoltageQuasiRMSSensor

starM

Type: Star

groundM

Type: Ground

terminalBox

Type: TerminalBox

rotorDisplacementAngle

Type: RotorDisplacementAngle

angleSensor

Type: AngleSensor

torqueSensor

Type: TorqueSensor

speedSensor

Type: SpeedSensor

inertiaLoad

Type: Inertia

quadraticSpeedDependentTorque

Type: QuadraticSpeedDependentTorque

smpmData

Type: SM_PermanentMagnetData

Description: Synchronous machine data

currentQuasiRMSSensor

Type: CurrentQuasiRMSSensor