QuasiStaticAnalogElectroMagneticConverterElectromagnetic converter to only (!) quasi-static analog, neglecting induced voltage |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The analog single-phase winding has an effective number of turns, 
and a respective orientation of the winding, 
. The current in the winding is 
.
The total complex magnetic potential difference of the single-phase winding is determined by:
where
is the reference angle of the electrical and magnetic system, respectively. The induced voltage 
is identical to zero.
See also
Modelica.Magnetic.FundamentalWave.Components.SinglePhaseElectroMagneticConverter, Modelica.Magnetic.FundamentalWave.Components.PolyphaseElectroMagneticConverter, PolyphaseElectroMagneticConverter
Parameters (1)
| effectiveTurns |
Value: Type: Real Description: Effective number of turns |
|---|
Connectors (4)
 |
pin_p |
Type: PositivePin Description: Positive pin |
|---|---|---|
 |
pin_n |
Type: NegativePin Description: Negative pin |
 |
port_p |
Type: PositiveMagneticPort Description: Positive complex magnetic port |
 |
port_n |
Type: NegativeMagneticPort Description: Negative complex magnetic port |
Components (2)
 |
V_m |
Type: ComplexMagneticPotentialDifference Description: Complex magnetic potential difference |
|---|---|---|
 |
Phi |
Type: ComplexMagneticFlux Description: Complex magnetic flux |
Used in Components (1)
 |
Modelica.Magnetic.QuasiStatic.FundamentalWave.BasicMachines.Components Quasi-static single-phase winding neglecting induced voltage |