This information is part of the Modelica Standard Library maintained by the Modelica Association.

Permanent magnet losses are modeled dependent on current and speed.

The permanent magnet losses are modeled such way that they do not cause a voltage drop in the electric circuit. Instead, the dissipated losses are considered through an equivalent braking torque at the shaft.

The permanent magnet loss torque is

tau = PRef/wRef * (c + (1 - c) * (i/IRef)^power_I) * (w/wRef)^power_w

where i is the current of the machine and w is the actual angular velocity. The parameter c designates the part of the permanent magnet losses that are present even at current = 0, i.e. independent of current. The dependency of the permanent magnet loss torque on the stator current is modeled by the exponent power_I. The dependency of the permanent magnet loss torque on the angular velocity is modeled by the exponent power_w.

See also

Permanent magnet loss parameters

If it is desired to neglect permanent magnet losses, set strayLoadParameters.PRef = 0 (this is the default).

useHeatPort	Value: false Type: Boolean Description: = true, if heatPort is enabled
m	Value: 3 Type: Integer Description: Number of phases
permanentMagnetLossParameters	Value: Type: PermanentMagnetLossParameters Description: Permanent magnet loss parameters

is	Type: ComplexCurrent[m] Description: Instantaneous stator currents