CylinderCylinder with rod and crank of a combustion engine |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Cylinder with rod and crank of a combustion engine. Used as submodel in Loops.EngineV6.
animation |
Value: true Type: Boolean Description: = true, if animation shall be enabled |
---|---|
cylinderTopPosition |
Value: 0.42 Type: Length (m) Description: Length from crank shaft to end of cylinder. |
pistonLength |
Value: 0.1 Type: Length (m) Description: Length of cylinder |
rodLength |
Value: 0.2 Type: Length (m) Description: Length of rod |
crankLength |
Value: 0.2 Type: Length (m) Description: Length of crank shaft in x direction |
crankPinOffset |
Value: 0.1 Type: Length (m) Description: Offset of crank pin from center axis |
crankPinLength |
Value: 0.1 Type: Length (m) Description: Offset of crank pin from center axis |
cylinderInclinationAngle |
Value: 0 Type: Angle (rad) Description: Inclination of cylinder |
crankAngleOffset |
Value: 0 Type: Angle (rad) Description: Offset for crank angle |
cylinderLength |
Value: cylinderTopPosition - (pistonLength + rodLength - crankPinOffset) Type: Length (m) Description: Maximum length of cylinder volume |
piston |
Type: BodyCylinder |
|
---|---|---|
connectingRod |
Type: BodyBox |
|
b2 |
Type: Revolute |
|
crank4 |
Type: BodyBox |
|
crank3 |
Type: BodyCylinder |
|
crank1 |
Type: BodyCylinder |
|
crank2 |
Type: BodyBox |
|
b1 | ||
mid |
Type: FixedTranslation |
|
cylinder |
Type: Prismatic |
|
mounting |
Type: FixedTranslation |
|
cylinderInclination |
Type: FixedRotation |
|
crankAngle1 |
Type: FixedRotation |
|
crankAngle2 |
Type: FixedRotation |
|
cylinderTop |
Type: FixedTranslation |
|
gasForce |
Type: GasForce2 |
Modelica.Mechanics.MultiBody.Examples.Loops V6 engine with 6 cylinders, 6 planar loops and 1 degree-of-freedom |