InverseInertiaInput/output block of an inverse inertia model |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
A rotational component with pure signal interface which can be applied for
a FMU (Functional Mock-up Unit)
exchange.
Based on the kinematic inputs applied on a component with inertia
the output torque tau
is returned.
J |
Value: 1 Type: Inertia (kg·m²) Description: Inertia |
---|
phi |
Type: RealInput Description: Angle to drive the inertia |
|
---|---|---|
w |
Type: RealInput Description: Speed to drive the inertia |
|
a |
Type: RealInput Description: Acceleration to drive the inertia |
|
tau |
Type: RealOutput Description: Torque needed to drive the flange according to phi, w, a |
inertia |
Type: Inertia |
|
---|---|---|
angleToTorque |
Type: AngleToTorqueAdaptor |
Modelica.Mechanics.Rotational.Examples Example to demonstrate variants to generate FMUs (Functional Mock-up Units) |