PartialElementaryTwoFlangesAndSupport2

Partial model for a component with two rotational 1-dim. shaft flanges and a support used for textual modeling, i.e., for elementary models

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a 1-dim. rotational component with two flanges and a support/housing. It is used to build up elementary components of a drive train with equations in the text layer.

If useSupport=true, the support connector is conditionally enabled and needs to be connected.
If useSupport=false, the support connector is conditionally disabled and instead the component is internally fixed to ground.

Parameters (1)

useSupport	Value: false Type: Boolean Description: = true, if support flange enabled, otherwise implicitly grounded

useSupport

Value: false

Type: Boolean

Description: = true, if support flange enabled, otherwise implicitly grounded

Connectors (3)

	flange_a	Type: Flange_a Description: Flange of left shaft
	flange_b	Type: Flange_b Description: Flange of right shaft
	support	Type: Support Description: Support/housing of component

flange_a

Type: Flange_a

Description: Flange of left shaft

flange_b

Type: Flange_b

Description: Flange of right shaft

support

Type: Support

Description: Support/housing of component

Extended by (4)

	LossyGear Modelica.Mechanics.Rotational.Components Gear with mesh efficiency and bearing friction (stuck/rolling possible)
	IdealGear Modelica.Mechanics.Rotational.Components Ideal gear without inertia
	Brake Modelica.Mechanics.Rotational.Components Brake based on Coulomb friction
	BearingFriction Modelica.Mechanics.Rotational.Components Coulomb friction in bearings