Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a partial model for 1-dim. rotational components with two rigidly connected flanges in order to measure relative kinematic quantities between the two flanges or the cut-torque in the flange and to provide the measured signal as output signal for further processing with the blocks of package Modelica.Blocks.

	flange_a	Type: Flange_a Description: Left flange of shaft
	flange_b	Type: Flange_b Description: Right flange of shaft

Extended by (6)

	MultiSensor Modelica.Mechanics.Rotational.Sensors Ideal sensor to measure the torque and power between two flanges (= flange_a.tau*der(flange_a.phi)) and the absolute angular velocity
	PowerSensor Modelica.Mechanics.Rotational.Sensors Ideal sensor to measure the power between two flanges (= flange_a.tau*der(flange_a.phi))
	TorqueSensor Modelica.Mechanics.Rotational.Sensors Ideal sensor to measure the torque between two flanges (= flange_a.tau)
	RelAccSensor Modelica.Mechanics.Rotational.Sensors Ideal sensor to measure the relative angular acceleration between two flanges
	RelSpeedSensor Modelica.Mechanics.Rotational.Sensors Ideal sensor to measure the relative angular velocity between two flanges
	RelAngleSensor Modelica.Mechanics.Rotational.Sensors Ideal sensor to measure the relative angle between two flanges

PartialRelativeSensor

Information

Connectors (2)

Extended by (6)