PartialCompliant

Compliant connection of two translational 1D flanges

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a 1D translational component with a compliant connection of two translational 1D flanges where inertial effects between the two flanges are not included. The absolute value of the force at the left and the right flange is the same. It is used to built up springs, dampers etc.

Connectors (2)

flange_a

Type: Flange_a

Description: (left) driving flange (flange axis directed into cut plane, e. g. from left to right)
flange_b

Type: Flange_b

Description: (right) driven flange (flange axis directed out of cut plane)

Extended by (3)

Spring

Modelica.Mechanics.Translational.Components

Linear 1D translational spring

SpringDamperNoRelativeStates

Modelica.Mechanics.Translational.Examples.Utilities

Linear 1D translational spring and damper in parallel (s and v are not used as states)

GasForce2

Modelica.Mechanics.MultiBody.Examples.Loops.Utilities

Rough approximation of gas force in a combustion engine's cylinder