Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a superclass for 1D translational components with two rigidly connected flanges and one output signal in order to measure relative kinematic quantities between the two flanges or the cut-force in the flange and to provide the measured signal as output signal for further processing with the Modelica.Blocks blocks.

Connectors (2)

	flange_a	Type: Flange_a Description: (left) driving flange (flange axis directed into cut plane, e. g. from left to right)
	flange_b	Type: Flange_b Description: (right) driven flange (flange axis directed out of cut plane)

flange_a

Type: Flange_a

Description: (left) driving flange (flange axis directed into cut plane, e. g. from left to right)

flange_b

Type: Flange_b

Description: (right) driven flange (flange axis directed out of cut plane)

Extended by (6)

	MultiSensor Modelica.Mechanics.Translational.Sensors Ideal sensor to measure the absolute velocity, force and power between two flanges
	PowerSensor Modelica.Mechanics.Translational.Sensors Ideal sensor to measure the power between two flanges (= flange_a.f*der(flange_a.s))
	ForceSensor Modelica.Mechanics.Translational.Sensors Ideal sensor to measure the force between two flanges
	RelAccSensor Modelica.Mechanics.Translational.Sensors Ideal sensor to measure the relative acceleration
	RelSpeedSensor Modelica.Mechanics.Translational.Sensors Ideal sensor to measure the relative speed
	RelPositionSensor Modelica.Mechanics.Translational.Sensors Ideal sensor to measure the relative position