PartialRigid

Rigid connection of two translational 1D flanges

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a 1-dim. translational component with two rigidly connected flanges. The fixed distance between the left and the right flange is defined by parameter "L". The forces at the right and left flange can be different. It is used e.g., to built up sliding masses.

Parameters (1)

L	Value: Type: Length (m) Description: Length of component, from left flange to right flange (= flange_b.s - flange_a.s)

Connectors (2)

	flange_a	Type: Flange_a Description: (left) driving flange (flange axis directed into cut plane, e. g. from left to right)
	flange_b	Type: Flange_b Description: (right) driven flange (flange axis directed out of cut plane)