Real	Quantity: "MassFlowRate." + mediumName Unit: kg/s Restricted Range: -1.0e5 to 1.e5

Used in Components (23)

	TankWith3InletOutletArraysWithEvaporatorCondensor Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses Tank with Heating and Evaporation
	InnerTank Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses
	TankWithTopPorts Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses Tank with inlet/outlet ports and with inlet ports at the top
	BasicHX Modelica.Fluid.Examples.HeatExchanger.BaseClasses Simple heat exchanger model
	PartialLumpedVessel Modelica.Fluid.Vessels.BaseClasses Lumped volume with a vector of fluid ports and replaceable heat transfer model
	StaticPipe Modelica.Fluid.Pipes Basic pipe flow model without storage of mass or energy
	PartialTwoPortFlow Modelica.Fluid.Pipes.BaseClasses Base class for distributed flow models
	PartialStaggeredFlowModel Modelica.Fluid.Pipes.BaseClasses.FlowModels Base class for momentum balances in flow models
	ControlledPump Modelica.Fluid.Machines Centrifugal pump with ideally controlled mass flow rate
	PartialPump Modelica.Fluid.Machines.BaseClasses Base model for centrifugal pumps
	ValveLinear Modelica.Fluid.Valves Valve for water/steam flows with linear pressure drop
	ValveDiscrete Modelica.Fluid.Valves Valve for water/steam flows with linear pressure drop
	ValveDiscreteRamp Modelica.Fluid.Valves Valve for water/steam flows with discrete opening signal and ramp opening
	PartialValve Modelica.Fluid.Valves.BaseClasses Base model for valves
	MassFlowSource_T Modelica.Fluid.Sources Ideal flow source that produces a prescribed mass flow with prescribed temperature, mass fraction and trace substances
	MassFlowSource_h Modelica.Fluid.Sources Ideal flow source that produces a prescribed mass flow with prescribed specific enthalpy, mass fraction and trace substances
	PartialFlowSensor Modelica.Fluid.Sensors.BaseClasses Partial component to model sensors that measure flow properties
	PartialTwoPortTransport Modelica.Fluid.Interfaces Partial element transporting fluid between two ports without storage of mass or energy
	PartialLumpedFlow Modelica.Fluid.Interfaces Base class for a lumped momentum balance
	PartialDistributedVolume Modelica.Fluid.Interfaces Base class for distributed volume models
	PartialDistributedFlow Modelica.Fluid.Interfaces Base class for a distributed momentum balance
	FixedMassFlowRate Modelica.Media.Examples.Utilities Ideal pump that produces a constant mass flow rate from a large reservoir at fixed temperature and mass fraction
	ShortPipe Modelica.Media.Examples.Utilities Simple pressure loss in pipe

MassFlowRate

Type Information

Used in Examples (2)

Used in Components (23)