This information is part of the Modelica Standard Library maintained by the Modelica Association.

This function calculates the liquid phase density of R134a from the state variable p (absolute pressure). It is modelled by cubic splines which are fitted with non-equidistant grid points derived from the fundamental equation of state of Tillner-Roth and Baehr (1994) and the Maxwell criteria.

Restrictions

It is only valid in the two-phase region (i.e., p_triple ≤ p ≤ p_crit ).

dl = bubbleDensity(sat)

sat	Type: SaturationProperties Description: Saturation property record

dl	Type: Density (kg/m³) Description: Boiling curve density