cond_dTpThermal conductivity lam(d,T,p) (industrial use version) only in one-phase region |
 |
Syntax
Inputs (6)
| d |
Type: Density (kg/m³) Description: Density |
|---|---|
| T |
Type: Temperature (K) Description: Temperature (K) |
| p |
Type: Pressure (Pa) Description: Pressure |
| phase |
Default Value: 0 Type: Integer Description: 2 for two-phase, 1 for one-phase, 0 if not known |
| industrialMethod |
Default Value: true Type: Boolean Description: If true, the industrial method is used, otherwise the scientific one |
| checkLimits |
Default Value: true Type: Boolean Description: Check if inputs d,T,P are in region of validity |
Outputs (1)
| lambda |
Type: ThermalConductivity (W/(m·K)) Description: Thermal conductivity |
|---|
Extended by (2)
 |
Modelica.Media.Water.IF97_Utilities Compute lambda(d,T,p) in the one-phase region |
 |
Modelica.Media.Air.ReferenceMoistAir.Utilities.IF97_new Thermal conductivity lam(d,T), industrial formulation |