| Name | Description |
|---|---|
PartialCutForceSensor | Obsolete model. Use instead a model from Modelica.Mechanics.MultiBody.Sensors |
This is a base class for 3-dim. mechanical components with two frames and one output port in order to measure the cut-force and/or cut-torque acting between the two frames and to provide the measured signals as output for further processing with the blocks of package Modelica.Blocks.
Extends from Modelica.Icons.RotationalSensor (Icon representing a round measurement device) and ObsoleteModelica3.Icons.ObsoleteModel (Icon for an obsolete model (use only for this case)).
| Type | Name | Description |
|---|---|---|
Frame_a | frame_a | Coordinate system with one cut-force and cut-torque |
Frame_b | frame_b | Coordinate system with one cut-force and cut-torque |
Frame_resolve | frame_resolve | If connected, the output signals are resolved in this frame (cut-force/-torque are set to zero) |
Generated 2018-12-12 12:17:44 EST by MapleSim.