.Modelica.Fluid.Fittings.MultiPort

Information

This model is useful if multiple connections shall be made to a port of a volume model exposing a state, like a pipe with ModelStructure av_vb. The mixing is shifted into the volume connected to port_a and the result is propagated back to each ports_b.

If multiple connections were directly made to the volume, then ideal mixing would take place in the connection set, outside the volume. This is normally not intended.

Contents

Name Description
 positiveMax
 Medium

Generated at 2020-06-05T07:38:22Z by OpenModelica 1.16.0~dev-420-gc007a39