.Modelica.Mechanics.MultiBody.Joints.Internal.PrismaticWithLengthConstraint

Information

Joint where frame_b is translated along axis n which is fixed in frame_a. The two frames coincide when "s + s_offset = 0", where "s_offset" is a parameter with a zero default and "s" is the relative distance.

This variant of the prismatic joint is designed to work together with a length constraint in a kinematic loop. This means that the relative distance "s" of the joint is computed such that the length constraint is fulfilled.

Usually, this joint should not be used by a user of the MultiBody library. It is only provided to built-up the Modelica.Mechanics.MultiBody.Joints.Assemblies.JointXYZ joints.

In releases before version 3.0 of the Modelica Standard Library, it was possible to activate the force projection equation (= cut-force projected to the translation axis must be identical to the driving force of flange axis) via parameter axisForceBalance. This is no longer possible, since otherwise this model would not be "balanced" (= same number of unknowns as equations). Instead, when using this model in version 3.0 and later versions, the force in the length constraint component (Joints.SphericalSpherical or Joints.UniversalSpherical) must be calculated such that the driving force in direction of the translation axis is (RC shall be the name of the instance of PrismaticWithLengthConstraint):

    0 = RC.axis.f + RC.e*RC.frame_b.f;

If this equation is used, usually the force in the length constraint and the second derivative of the prismatic distance will be part of a linear algebraic system of equations. In some cases it is possible to solve this system of equations locally, i.e., provide the rod force directly as function of the prismatic constraint force. In any case, this projection equation or an equivalent one has to be provided via variable "constraintResidue" in the "Advanced" menu of "Joints.SphericalSpherical" or "Joints.UniversalSpherical".