Standard package icon.
Extends from Modelica.Icons.Package (Icon for standard packages).
| Name | Description |
|---|---|
QuasiRMS |
This block determines the continuous quasi RMS value of a multi phase system, representing an equivalent RMS vector or phasor. If the waveform of the input deviates from a sine curve, the output of the sensor will not be exactly the average RMS value.
y = sqrt(sum(u[k]^2 for k in 1:m)/m)
Extends from Modelica.Blocks.Interfaces.SO (Single Output continuous control block).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
output RealOutput | y | Connector of Real output signal |
input RealInput | u[m] |
Generated 2018-12-12 12:10:17 EST by MapleSim.