This icon indicates packages containing interfaces.
Extends from Modelica.Icons.InterfacesPackage (Icon for packages containing interfaces).
| Name | Description |
|---|---|
AbsoluteSensor | Partial potential sensor |
NegativePlug | Negative quasi-static polyphase plug |
OnePort | |
Plug | Quasi-static polyphase plug |
PositivePlug | Positive quasi-static polyphase plug |
ReferenceSource | Partial of voltage or current source with reference input |
RelativeSensor | Partial voltage / current sensor |
Source | Partial voltage / current source |
TwoPlug | Two plugs with pin-adapter |
This multiphase plug contains a vector of m single phase pins. The positive and negative plug are derived from this base connector.
Pin, PositivePin, NegativePin, PositivePlug, NegativePlug
| Type | Name | Description |
|---|---|---|
parameter Integer | m | Number of phases |
Pin | pin[m] | Pins of plug |
The positive plug is based on Plug. Additionally the reference angle is specified in the connector. The time derivative of the reference angle is the actual angular velocity of each quasi stationary voltage and current. The symbol is also designed such way to look different than the negative plug.
Pin, PositivePin, NegativePin, Plug, NegativePlug
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.Plug (Quasi-static polyphase plug).
| Type | Name | Description |
|---|---|---|
parameter Integer | m | Number of phases |
Pin | pin[m] | Pins of plug |
Reference | reference | Reference |
The negative plug is based on Plug. Additionally the reference angle is specified in the connector. The time derivative of the reference angle is the actual angular velocity of each quasi stationary voltage and current. The symbol is also designed such way to look different than the positive plug.
Pin, PositivePin, NegativePin, Plug, PositivePlug,
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.Plug (Quasi-static polyphase plug).
| Type | Name | Description |
|---|---|---|
parameter Integer | m | Number of phases |
Pin | pin[m] | Pins of plug |
Reference | reference |
This partial model uses a positive and negative plug and defines the complex voltage differences as well as the complex currents (into the positive plug). A positive and a negative adapter are used to give easy access to the single pins of both plugs. Additionally, the angular velocity of the quasi stationary system is explicitly defined as variable. This model is mainly intended to be used with graphical representation of user models.
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
The absolute sensor partial model relies on the a positive plug to measure the complex potential. Additionally this model contains a proper icon and a definition of the angular velocity.
RelativeSensor, SinglePhase.Interfaces.AbsoluteSensor, SinglePhase.Interfaces.RelativeSensor
Extends from Modelica.Icons.RotationalSensor (Icon representing a round measurement device).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
The relative sensor partial model relies on the TwoPlug to measure the complex voltages, currents or power. Additionally this model contains a proper icon and a definition of the angular velocity.
AbsoluteSensor, SinglePhase.Interfaces.AbsoluteSensor, SinglePhase.Interfaces.RelativeSensor
Extends from Modelica.Icons.RotationalSensor (Icon representing a round measurement device) and Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.TwoPlug (Two plugs with pin-adapter).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
output ComplexOutput | y[m] |
The source partial model relies on the TwoPlug and contains a proper icon.
VoltageSource, VariableVoltageSource, CurrentSource, VariableCurrentSource, SinglePhase.Interfaces.Source.
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.OnePort.
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
The source partial model relies on the TwoPlug and contains a proper icon.
VoltageSource, VariableVoltageSource, CurrentSource, VariableCurrentSource, SinglePhase.Interfaces.Source.
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.OnePort.
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
Generated 2018-12-12 12:10:34 EST by MapleSim.