Information
Standard package icon.
Extends from Modelica.Icons.TypesPackage
(Icon for packages containing type definitions).
Package Contents
Information
This icon is designed for a Real type.
Extends from Modelica.Icons.TypeReal
(Icon for Real types).
Attributes
Name | Value |
---|
quantity | "Darcy friction factor | lambda_fri = zeta_fri / (length/diameter)" |
unit | "1" |
min | 0 |
max | 1111 |
start | 0. |
Information
This icon is designed for a Real type.
Extends from Modelica.Icons.TypeReal
(Icon for Real types).
Attributes
Name | Value |
---|
quantity | "Frictional resistance coefficient | zeta_fri" |
unit | "1" |
min | 0 |
max | 1111 |
start | 0. |
Information
This icon is designed for a Real type.
Extends from Modelica.Icons.TypeReal
(Icon for Real types).
Attributes
Name | Value |
---|
quantity | "Local resistance coefficient | zeta_loc" |
unit | "1" |
min | 0 |
max | 1111 |
start | 0. |
Information
This icon is designed for a Real type.
Extends from Modelica.Icons.TypeReal
(Icon for Real types).
Attributes
Name | Value |
---|
quantity | "Pressure loss coefficient | zeta_tot = zeta_loc + zeta_fri" |
unit | "1" |
min | 0 |
max | 1111 |
start | 0. |
Literals
Name | Description |
---|
Friedel | Friedel correlation for frictional pressure loss |
Chisholm | Chisholm correlation for frictional pressure loss |
Literals
Name | Description |
---|
Neglected | Neglect surface roughness |
Considered | Consider surface roughness |
Literals
Name | Description |
---|
BoilHor | Boiling horizontal |
BoilVer | Boiling vertical |
CondHor | Condensation horizontal |
Literals
Name | Description |
---|
PressureLoss | Calculate pressure loss from mass flow rate |
MassFlowRate | Calculate mass flow rate from pressure loss |
Literals
Name | Description |
---|
Annular | Annular geometry |
Circular | Circular geometry |
Elliptical | Elliptical geometry |
Rectangular | Rectangular geometry |
Isosceles | Isosceles triangular geometry |
Literals
Name | Description |
---|
DevOne | Hydrodynamically DEVELOPED laminar flow regime AND heat transfer at ONE side |
DevBoth | Hydrodynamically DEVELOPED laminar flow regime AND heat transfer at BOTH sides |
UndevOne | Hydrodynamic and thermal START of laminar flow regime AND heat transfer at ONE side |
UndevBoth | Hydrodynamic and thermal START of laminar flow regime AND heat transfer at BOTH side |
Literals
Name | Description |
---|
Rough | Roughest approximation w.r.t. Dittus/Boelter (1930) |
Middle | Middle approximation w.r.t. Sieder/Tate (1936) |
Finest | Finest approximation w.r.t. Gnielinski (1976) |
Literals
Name | Description |
---|
UWTuDFF | Uniform wall temperature in developed fluid flow (UWT+DFF) |
UHFuDFF | Uniform heat flux in developed fluid flow (UHF+DFF) |
UWTuUFF | Uniform wall temperature in undeveloped fluid flow (UWT+UFF) |
UHFuUFF | Uniform heat flux in undeveloped fluid flow (UHF+UFF) |
Literals
Name | Description |
---|
MassFlowRate | Mass flow rate |
VolumeFlowRate | Volume flow rate |
Literals
Name | Description |
---|
Homogeneous | Homogeneous approach |
Momentum | Analytical momentum flux approach (heterogeneous) |
Energy | Kinetic energy flow approach w.r.t. Zivi (heterogeneous) |
Chisholm | Empirical momentum flux approach w.r.t. Chisholm (heterogeneous) |
Literals
Name | Description |
---|
SharpEdged | Sharp edged shape of orifice inlet |
ThickEdged | Thick edged shape of orifice inlet |
TiltedEdged | Tilted edged shape of orifice inlet |
RoundedEdged | Rounded edged shape of orifice inlet |
Literals
Name | Description |
---|
Ball | Ball valve |
Diaphragm | Diaphragm valve |
Butterfly | Butterfly valve |
Gate | Gate valve |
Sluice | Sluice valve |
Literals
Name | Description |
---|
AV | Av (metric) flow coefficient |
KV | Kv (metric) flow coefficient |
CV | Cv (US) flow coefficient |
OP | Av defined by operating point |
Literals
Name | Description |
---|
Laminar | Laminar fluid flow regime |
Overall | Overall fluid flow regime |
Turbulent | Turbulent fluid flow regime |
Literals
Name | Description |
---|
LouverFin | Louver fin |
RectangularFin | Rectangular offset strip fin |
Literals
Name | Description |
---|
PlainFin | Plain fin |
LouverFin | Louver fin |
SlitFin | Slit fin |
WavyFin | Wavy fin (Herringbone wavy fin) |
Extends from Real
.
Attributes
Name | Value |
---|
quantity | "Molar mass" |
unit | "g/mol" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
Generated 2018-12-12 12:13:37 EST by MapleSim.